Flexible bending center


 
Model: 1400/2000/2500X Series/1400/2000/2500P Series
Minimum material thickness: about0.35mm
Maximum bending size: 1400mm*1400mm/2000mm*2000mm/2500mm*2500mm
Share
Flexible bending center
Flexible bending center
Flexible bending center
Flexible bending center
Flexible bending center
Flexible bending center
Product Description
High degree of automation, easy operation and strong compatibility
Industry 4.0 architecture, which can be upgraded smoothly;
No molding required, complex shapes (folded up or down right angles, non-right angles)
Free design and production at any time;
Wide range of applicable materials, mainly stainless steel, cold-rolled plate, etc.;
Compatible with various loading and unloading methods: manual loading and unloading, self-driven robotic arm loading and √unloading, and docking robotic arm loading and unloading are all optional.
High degree of automation, easy operation and strong compatibility
Higher efficiency and lower cost
Fast speed, only 0.2 seconds per knife;
Rapid prototyping of workpieces with high consistency;
Low power consumption, simple daily maintenance and low cost;
High degree of automation, simple operation, low labor requirements;
Friendly man-machine interface, easy to understand, flexible programming;
For workpieces with non-standard sizes, different positioning references can be selected according to the shape of the workpiece, and the shearing error of the plate can be controlled on the first bending edge to ensure the dimensional accuracy after forming.
Higher efficiency and lower cost
1400X/2000X/2500X SERIES configuration parametes
Maximum bending speed: 0.2 second/shot
Maximum bending width: 1400mm/ 2000mm/2500mm
Bending height:About 170mm(customizable)
The rated voltage380V
Peak powerabout 18KW/22KW25KW
Average powerabout 1.8KW/22KW/2.5KW
The noiseabout 50 decibels
Dimensions440cm*190cm*290cm/420cm*265cm*330cm/480cm*295cm*310cm
The total qualityabout12tons/15tons/18tons
Maximum beding thicknessUTS 515N/mm2 201stainless steel 0.8mm
standard                          UTS 520N/mm2 304stainless steel 1.0mm
Optional thickness          UTS 410N/mm2 304cold plate 1.2mm
                                            UTS 265N/mm2 304Aluminum plate 1.6mm
Minimum material thicknessabout0.35mm
Minimum inner dimensions140mm*190mm/220mm*290mm/220mm*290mm
Minimum inner size 140mm/220mm/220mm
Minimum bending size 1400mm*1400mm/2000mm*2000mm/2500mm*2500mm
Number of shafstandard 9axis concurrent linkage
Conventional hinge cutter(option)
Power hinge cutter(option)
1400X/2000X/2500X SERIES configuration parametes
1400P/2000P/2500P SERIES configuration parametes
Maximum bending speed: 0.2 second/shot
Maximum bending width: 1400mm/2000mm/2500mm
Bending height:About 170mm(customizable)
The rated voltage380V
Peak powerabout 18KW/25KW/28KW
Average powerabout 1.8KW/2.5KW/2.8KW
The noiseabout 50 decibels
Dimensions440cm*190*cm*290cm/510cm*265cm*330cm/565cm*300cm*340cm
The total qualityabout12tons/16tons/19tons
Maximum beding thicknessUTS 515N/mm2 201stainless steel 0.8mm
standard                            UTS 520N/mm2 304stainless steel 1.0mm
Optional thickness           UTS 410N/mm2 304cold plate 1.2mm
                                                  UTS 265N/mm2 304Aluminum plate 1.6mm
Minimum material thicknessabout0.35mm
Minimum inner dimensionsabout140mm*190mm
Minimum inner sizeabout140mm
Minimum bending sizeabout1400mm*1400mm/2000mm*1250mm/2500mm*1250mm
Number of shafstandard 13axis concurrent linkage
Conventional hinge cutter(option)
Power hinge cutter(option)
1400P/2000P/2500P SERIES configuration parametes
Parameter
Numerical control system PC-BASE independently newly developed 13-axis linkage full-servo numerical control system.The hardware circuit board is independently designed for lead-free soldering, and the surface is gold-immersed processing technology.
Servo motor Independent research and development of fully closed loop system
Screw Domestic top screw manufacturer Nanjing Technology (grinding grade)
Bearings NACHI the world’s top Japanese bearing manufacturer
Line rail Baiwei independently designed high-grade casting fuselage
Cutting tool Baiwei patented cutting tool, using deep carbon processing technology, high-frequency quenching overall quenching and tempering.More wear-resistant, longer service life.
Coupling Tekman
Pneumatic accessories Japan SMC, Taiwan Airtac
Electrical components Schneider, France
Oil System Taiwan Yuxiang
Connect with us
Agree to our terms and conditions
Happy to help
24*7 service support and technical assistance. You're welcome to visit our office for other insights
Address
No.98, Wuzhi County Industry Gathering Area, Jiaozuo, Henan Province, China.
Chat now >
0086-17719865105
market@baiweilaser.com
17719865105